The HID Light Manager

The HID Light Manager controls any ballast-based, gaseous discharge lighting system. This includes Mercury Vapor, Metal Halide, High and Low Pressure Sodium. Its flexible design allows the HID Light Manager to interface with any dedicated lighting circuit of 480 volts in capacities of 10 to 100 amperes three phase. One unit can reduce the energy consumption of one, ten, 100 or even 400 lighting fixtures and the savings can be measured within 20 minutes after the lights turn on!

The HID Light Manager works in conjunction with other energy savings devices such as high efficiency lamps, photoelectric switches, and other energy management systems. Down-line switching capability is also an available option. Additionally, running the lamps at a lower wattage will reduce the operating temperature, this prolonging the life of the lamps and the ballasts by up to 40%. The HID Light Manager controls spikes, controls and regulates line voltage to induce savings and also prevents over-voltage situations, which are a major cause of premature lighting system failure.

We offer 4 sizes and custom sizes as well:

• 10kva or 12amps 3-phase 480 volt
• 15kva or 18amps 3-phase 480 volt
• 25kva or 30amps 3-phase 480 volt
• 50kva or 60amps 3-phase 480 volt

Benefits

• Most Importantly, immediate reduction of electricity costs
• Automatic By-pass built in
• Existing ballast, fixtures or lamps do not require replacement
• Arizona Power Save HID Light Manager is compact requiring limited space
• Installation is quick, easy and requires minimal adoption to existing equipment
• Arizona Power Save HID Light Manager unit has a display on front of the controller
• LED display for time (am/pm), date month, hour, energy saving levels and up to 16 stage display for logic controller
• Environmentally friendly, reduced consumption of electricity equals reduced greenhouse gases generated
• Cost effective solution
• Investment return in approximately 12 to 30 months
• Reduce real demand and penalty charges
• Peak load incentives (contact your local utility for details and availability)

HID Light Manager can be used in the following applications:

Street lighting, highways, bridges, tunnels, parking areas, indoor and outdoor garages, industrial buildings, plants, warehouses, factories, large showrooms, hospitals, care facilities, correctional facilities, museums, shopping malls, large retail stores, casinos, gas stations, schools, university, colleges, educational facilities, government buildings, condominiums, rental properties, high-rise buildings, sport facilities, ice rinks, soccer fields, baseball diamonds and all indoor sporting facilities (pools, tennis, fitness club etc.)

The Fluorescent Light Manager

As the world phases out incandescent lights, new more efficient light sources are gaining popularity, and as such, the need for controlling these devices is becoming increasingly critical. For the past decade, dimming fluorescent light sources has been a challenging task because the ideal device would control the light level to provide comfort for residential and office environments, while at the same time, enabling energy savings especially in commercial installations.

A number of manufacturers offer solutions to this problem; however, all have common deficiencies: high initial costs, extensive changes in existing installations, or the inability to control all the various types of light sources.

Arizona Power Save offers a solution to these problems using patented technology for controlling all Compact Fluorescent Lights (non-dimmable and dimmable) and Fluorescent Linear Tubes (T12, T8, T5, circular) with non-dimmable ballasts. The device has also proven suitable for controlling neon, cold cathode, halogen, and incandescent lights. Because of it unique ability to control such various sources, it is also currently under test for other control functions such as improved fan speed control.

This Universal Control Device (UCD) represents a true breakthrough in technology. Installation is made simple since it is a direct replacement of the existing wall switch. Also initial adjustment for size of the light load and dimming can be preset to the customer’s preference.

The first model has been designed UCD-01 for a single phase 120V / 60Hz, 300W load. The unit meets safety standards for Solid-State Dimming Controls, ANSI/UL 1472 First Edition, and CSA-C22.2 No. 184-96.

Additional features of future models will be improved controls including light harvesting remote control, motion and/or infrared sensors, and touch screen displays.

Product Description

300W-120VAC Universal Control Device dimmer for single pole applications with all Compact Fluorescent Lights (non-dimmable and dimmable), Fluorescent Linear Tubes with standard electric and magnetic ballasts, Cold Cathode Lamps, Halogen, and Incandescent lights.

Product Features

• Model Name: UCD -01
• Switch Type: Single Pole
• Type: Digital
• Load Type: Resistive, Inductive, Capacitive
• Load Rating: 300W / 150W CFL *not to exceed 200W CFL
• Voltage: 120V AC 60 Hz
• Warranty: 1 year limited
• Standards and Certifications: ETL/CSA
• GFI Compatible
• Color: White
• United States Patent 7164238

Our Products

• Commercial Solar Electric
• Solar Thermal - Water Heating
• Eco Pro 3200 & 3400
• Designer Lighting System
• HID Light Manager
  • The HID System / Specs
  • HID Light Manager Install Instructions (pdf)
  • Fluorescent Light Manager Reference Guide (pdf)
  • Fluorescent Light Manager Install Instructions (pdf)
  • Fluorescent Light Specifications
  • Dealer Opportunities
• Government Incentives